Humax Freesat postcode?

[cos32]

Hello to all,

I wonder if anyone can help me, I have just bought a Humax HD
freesat box to Cyprus. If I try to go through the Freesat menu
it asks for a post code.

No matter what post code I put in even my
UK post code it just will not accept it. Does anyone know why?

As a freesat box does not transmit in anyway so why will it not
go any further. If I go and do it manually it tunes to all the FTA
and works.

Can anyone help?

Cos32

 

[satelliteman]

Maybe it can tell your not in the UK LOl

 

[Zorba]

Try your Cyprus post code

 

[satelliteman]

On a serious note, it's an interesting point made

 

[Zorba]

Has anybody else tried a freesat humax out of the UK ?

 

[Robbo]

See Analogue's post in this thread:-

http://www.satellites.co.uk/satellite/freesat/127201-itvhd-scotland-ireland.html

There are a few postcodes there to try.
I don't have a freesat box, so could only suggest maybe, leave out the space, or put it in.

 

[cos32]

See Analogue's post in this thread:-

http://www.satellites.co.uk/satellite/freesat/127201-itvhd-scotland-ireland.html

There are a few postcodes there to try.
I don't have a freesat box, so could only suggest maybe, leave out the space, or put it in.

Hi there I have already tried all sorts of combinations and all sorts
of post codes..but nothing.


Cos32

 

[satelliteman]

Could you have a box problem after all

 

[cos32]

Could you have a box problem after all

I don't think it is a box problem, going into manual mode
the box does scan and download the FTA channels, so the
box is working in a fashion. I have just written to Humax
lets see if they respond, I told them I am in Cyprus and what
the problem is, I have not seen any mention about not using
it outside the UK as Sky does.

 

[satelliteman]

Interesting, and as you can see 2d signals, what difference is it if your are there or in the UK with reference to the box

Well I am assuming you can download bbc & itv.............

 

[Robbo]

If I go and do it manually it tunes to all the FTA
and works.


Cos32

Do you actually have ALL the FTA channels?
(check lyngsat). What size dish is it?

 

[cos32]

Hi Well there is 4mtr dish on top of the house and
all ITV and BBC channels are available apart from those
on the V transponder on 2D. Not found ITV HD and not
sure if its obtainable here.

I have also tried the Humax with a 2.7mtr dish
and have noticed that the tuner in the Humax
is superior than that of sky boxes that I have come
across. Pace 430N and the panasonic TSB30

During the morning normally break up occurs
on ITV and BBC as yet no brake up has occurred
on the Humax....so far.


The post code problem is still bugging me

Cos32

 

[alec]

I've just set up a Humax Freesat HD box for a neighbour here in southern France.

I am very impressed - a very neat little box with stonking signal strength (their old Sky box was showing about 40% signal strength - suspicion that the dish had been moved in recent gales - but the Humax went straight to 95% with 100% signal quality) and great picture quality.

No problem putting in their UK postcode (in Shropshire).

Ideas (OK, you've probably tried them but...)

Have you tried using the virtual keyboard input instead of the remote keys?

Could there be confusion between 0 (zero) and (letter) O?

 

[cos32]

I've just set up a Humax Freesat HD box for a neighbour here in southern France.

I am very impressed - a very neat little box with stonking signal strength (their old Sky box was showing about 40% signal strength - suspicion that the dish had been moved in recent gales - but the Humax went straight to 95% with 100% signal quality) and great picture quality.

No problem putting in their UK postcode (in Shropshire).

Ideas (OK, you've probably tried them but...)

Have you tried using the virtual keyboard input instead of the remote keys?

Could there be confusion between 0 (zero) and (letter) O?

No as I do not hat the 0 in the post code I use. I have tried several with
no luck.

 

[cswbo]

Hello to all,

I wonder if anyone can help me, I have just bought a Humax HD
freesat box to Cyprus. If I try to go through the Freesat menu
it asks for a post code.

No matter what post code I put in even my
UK post code it just will not accept it. Does anyone know why?

As a freesat box does not transmit in anyway so why will it not
go any further. If I go and do it manually it tunes to all the FTA
and works.

Can anyone help?

Cos32

I had a similar problem when I first got my Humax and installed my dish. I put in my postcode and several others I know, but the Humax would not accept them.

The problem appeared to be dish alignment, because when I adjusted my dish to get a better signal, the postcode was accepted without any problem.

I can only assume that the Humax reads a list of acceptable postcodes off air and if it can't do that then it won't proceed.

cswbo.

 

[Tsiklon]

Freesat use 11428 H 27500 on Eurobird 1 as their main data transponder. A 4 meter dish would have a narrow beamwidth and if focussed on Astra 2D, might have poor reception on that TP.

What's Eurobird reception like in Cyprus?

 

[satelliteman]

A valid point made
What do you installers do over there, peak on 2d? or E1?

I believe Cyprus has a better chance with S1 beam rather than the fixed

 

[Zorba]

We normally peak on 2D on a new installation. I just tried 11.428H on my 3m but no signal.We do get some eurobird channels.
Thats an interesting point about the 11.428 Tsiklon, because today a customer brought over from UK a Goodmans Freesat receiver and when connected it said on screen signal is less than 50% so check dish alignment ,and I cannot get the message off or enter any menu. Connecting a normal digibox gives me the usual good signals and pictures from a 3m dish.
Can anybody help?

 

[satelliteman]

If the freesat box wants to look at Eurobird 11.428H first to pass the initial set up ( as that's where the EPG info is ) then that could be a problem.

........... Bit like the changing of the default Transponder on a Sl<y box...... Zorba ?????

 

[Tsiklon]

What would be the minimum size dish needed to receive that transponder on E1?

I presume the 4M is a fixed dish so you can't nudge it east when powering on the freesat box. An alternative would be to have a small dish aligned on E1, and use a manual switch as the freesat box is powered on, so that it can download the EPG data, then switch back again to the 4m dish on 2D.