Top Tip T2-MI reception on E2 STB with SDG image - A complete step by step guide

[4Himdj]

There is no evidence because I DO NOT receive this TP. Plus some work you need to do yourselves!
And I never described any way to edit the lamedb directly. I use Dreamboxedit exclusively for that. And this is exactly what my tutorial states, you scan the TP and edit the found data channel as a source channel. This is the easiest way to have a new source channel once it appears.
But.... when some people are only used to find everything ready, and the tutorial became somehow a work of someone else on different forums, anything is to be expected.
Honestly, I have deeply regretted my decision to help with T2-MI in the first place. Should have kept the solution to myself....

I was misunderstood.
Your work is a milestone in satellite hobbist history
Without you maybe nobody can watch t2-mi
I did not criticize you
Best regards.

 

[ciefp]

Thank you analoguesat
I've finally managed to let t2-mi work
but In the code mcgelliot posted for astra.conf and bouquet it seems there is no evidence of trasponder 12648 v (that it's the strongest one of the t2-mi)
I've tried to follow the scheme and add it on astra.conf, bouquet and lamedb but after this addition t2-mi stop to work. so i delete what i've wrote

do someone knows what to add only in astra.conf and bouquet?
thank you
best regards

You can try my list. I added 12648 V according to the instructions from MCelliotG. I think that only that transponder without lame.db will not work for you. I advise you to try my settings.

f12648rtrs1 = make_t2mi_decap({
name = "12648V T2-MI PLP1",
input = "http://127.0.0.1:8001/1:0:1:320:3A2:0:225B168:0:0:0:", -- required
plp = 1,
pnr = 0,
pid = 4096,
})

make_channel({
name = "12648rtrs1 ", input = { "t2mi://f12648rtrs1", },
output = { "http://0.0.0.0:9999/rtrs/12648plp1", },
})

#SERVICE 1:64:167:0:0:0:0:0:0:0::-- 12648 V --
#DESCRIPTION -- 12648 V --
#SERVICE 1:0:1:3FC:3168:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12648plp1:02 РОССИЯ-1
#DESCRIPTION 02 РОССИЯ-1
#SERVICE 1:0:1:42E:3168:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12648plp1:07 РОССИЯ-24
#DESCRIPTION 07 РОССИЯ-24
#SERVICE 1:0:1:442:3168:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12648plp1:09 ОТР
#DESCRIPTION 09 ОТР

:: ciefpsettings E2 ::
..:: 12.05.2020 ::..

## Yamal 402 (54,9°E) ##

Update astra.conf - copy new conf to /etc ,755
add 12648 V
Thanks to MCelliotG

RTRS - T2MI streamrelay
12648 V - ok ( russia 1 scrambled )
12674 V - for me no signal
12694 V - ok all channels

 

[4Himdj]

thank you very much works perfectly!

 

[nirvana]

for the lameb speech how did you solve?

 

[Analoguesat]

for the lameb speech how did you solve?

I told you a couple of weeks ago the info you want is on the forum. Use the search beacause no-one is going to do all the work for you. If you use the forum search & look up lamedb 8 pages of results come up - so ypou have a lot of reading to do.

If you cant be bothered to do the research then you do without.

 

[nirvana]

I told you a couple of weeks ago the info you want is on the forum. Use the search beacause no-one is going to do all the work for you. If you use the forum search & look up lamedb 8 pages of results come up - so ypou have a lot of reading to do.

If you cant be bothered to do the research then you do without.

the question was not directed at you

 

[4Himdj]

for the lameb speech how did you solve?

good morning,
after I copied what ciefp have posted I've followed what is written on page 1 of this topic

I know it could seems hard, but after several attempts, it managed to work (it's also a satisfaction because all of this attemps makes me smarter in general with enigma2)

regards

 

[nirvana]

good morning,
after I copied what ciefp have posted I've followed what is written on page 1 of this topic

I know it could seems hard, but after several attempts, it managed to work (it's also a satisfaction because all of this attemps makes me smarter in general with enigma2)

regards

where the discussion of the lamedb in 1 page?

 

[4Himdj]

where the discussion of the lamedb in 1 page?

good morning
if I have not misunderstood you can modify lamedb in this way:
scan the t2-mi channel
import files to dreamboxedit
edit the channel as it's written on page 1
send the files back to the receiver

then if you choose a t2-mi channel from favourite folder of the settings posted, it works

best regards

 

[ciefp]

:: ciefpsettings E2 ::
..:: 16.06.2020 ::..

Update astra.conf
copy to /etc/astra/ and reboot
Update RTRS Krasnodarskij T2MI 54,9E
12674 v - signal is OK again
add 12714 v
ciefpsettings-enigma2-Abertis-RTRS t2mi 16.06.2020

 

[satesco]

54.9E-T2-Mi atm:
12674 V-PLP 0 & PLP 1,
12694 V-PLP 0 & PLP 1,
12648 V-PLP 1

 

[nttplpet]

I need astra.conf and the userbouquet.tv for frequencies 3655 L 15284 & 3635 L 15284 at 49E C-Band

Thanks for your help me.
Regards,

 

[Captain Jack]

All information is already in this thread...

 

[ozumo]

It doesn't/won't work in Enigma2 - it doesn't even initialise in it.

I just put the CAM in Openbox and it gives me colours.

Does this cam open Match! now it's encrypted?

 

[Captain Jack]

Yes it does. I checked it yesterday

 

[vitalik19]

Всем привет!
Большая благодарность MCelliotG за сделанную возможность наблюдать T2-MI.

По вашей системе сделал много спутников где есть T2-MI -это 40еС,49еС,55еС,90еС. Все они анализируются без проблем.








Но есть один транспондер на Yamal 601 @ 49° E -- 3977 L 15284 который не анализируется:
astra --analyze "t2mi://#t2mi_pid=4096&t2mi_plp=0&t2mi_pnr=0&t2mi_input=http://127.0.0.1:8001/1:0:1:320:3A2:0:1EB0F89:0:0:0:"

Сигнал на 3977 L 15284 сильный


Но он не анализируется....


Об этой проблеме ещё писали летом с 3977 L 15284:
Sat-Digest | T2-MI через спутник

По наблюдениям Ustym 4K PRO,Octagon -его не сканирует вообще...


А вот Denys H.265,openbox ,его сканирует 3977 L 15284




Вопрос,как можно ещё проанализировать 3977 L 15284,чтобы работал на Stream relay.

Заранее большое спасибо!

 

[Lazarus]

Mod. Note

Please Post in English in this part of the Forum, or at the very least provide a translation.

We do have International Sections if you wish to exchange information and ideas other than in English.

 

[Lazarus]

^^^^^^^^^^^





Here's a start:






Hello everyone! Many thanks to MCelliotG for making it possible to observe T2-MI. According to your system, I made many satellites where there is T2-MI - these are 40eC, 49eC, 55eC, 90eC. All of them are analyzed without problems. But there is one transponder on Yamal 601 @ 49 ° E - 3977 L 15284 which is not analyzed: astra --analyze "t2mi: // # t2mi_pid = 4096 & t2mi_plp = 0 & t2mi_pnr = 0 & t2mi_input = http: //127.0.0.1: 8001/1: 0: 1: 320: 3A2: 0: 1EB0F89: 0: 0: 0:" Signal for 3977 L 15284 strong But it is not analyzed .... They wrote about this problem in the summer with 3977 L 15284: Sat-Digest | T2-MI via satellite According to Ustym 4K PRO, Octagon does not scan it at all ... But Denys H.265, openbox, it is scanned by 3977 L 15284 The question is, how else can you analyze 3977 L 15284 to work on Stream relay. Thank you very much in advance.

 

[MCelliotG]

Thanks for the nice (russian) words!
Most probably the tp will not be analyzed because T2-MI is not hidden under pid 4096. Try pid 80 instead and maybe you'll get lucky.

 

[vitalik19]

Спасибо,завтра буду дома,сразу попробую!

Мне сделали запись TS : FEX.NET

С транспондера 49еС 3977 L 15284 .

Посмотрите на поток пожалуйста!


Thank you, I'll be home tomorrow, I'll try it right away!

I got a TS recording: FEX.NET

From transponder 49eC 3977 L 15284.

Look at the flow please!

Пожалуйста, посмотрите на поток!