Man, I am in same condiçôes that you! Plate of 110, disecq 1,2, lnb univ, KBox metronic. I tried, I tried and I gave up! I finished for placing a fixed one in the wall lined up to hispasat and functions (to the times). He is impossivel with satfinder/metter to obtain to syntonize the 6 or 8 satelites, in set. The only solution is speech with some technician of rank of antennas that has a field measurer (this device only costs… +1000 Euros). I inclusivé used a mast with 2 meters where the rotating old parabolica was placed (analogical) and did not obtain. This system differs from the old one because the analogica antenna twirled on a vertical axle, always with the same inclination and lnb always remained always the same distancia in relation to the foot of the mast, although to follow the plate for esq or to dir. With the system disecq the LNB is almost in the horizontal line when wheels the plate for 30W or 30E. This prominor takes the one that you will have 1 minute of shunting line (1/60 of degree or + 0,10 mm) in the tunning of a satelite this has repercuções in all the tunnings of the other satellites (if you want to know to the certain o disorder is you will multiply 0,10 mm for the distancia of the land to the satellite in question. Already now if to know of some technician of rank of antennas with the such equipment says that I tamém want however… I fix the antenna for a satellite and aguenta you with this. Friend, only but a detail… before arriving at this conclusion, had been 3 here technician (mounters of antennas) that with all its experiencia had obtained that you and I the same and had made that I the same and probably the same that you! It forgives the disillusion there!