Zeonbud 12188H on 4.8E

MCelliotG

MCelliotG

Specialist Contributor
Joined
May 10, 2015
Messages
1,012
Reaction score
1,200
Points
113
My Satellite Setup
TBS 5925, Mut@nt HD51, EDISION OSMINI, MABO 130X144, DRAGONSAT DS3000 LED MOTOR, INVERTO BLACK ULTRA TWIN LNB
My Location
Thessaloniki, Greece
It seems that both streams 10 and 20 on 12188H are now T2-MI, since the channels don't download directly on my receiver as they used to a few days ago!
Running 4T2 analyzer shows me this
12188HT2MI.PNG
Now, if this is an indication the remaining two streams on 12341H might soon pass on T2-MI as well! Ouch!!!
 
Adam792

Adam792

Specialist Contributor
Joined
Sep 5, 2009
Messages
1,260
Reaction score
1,152
Points
113
Age
31
My Satellite Setup
Dishes: 80cm (5°W), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC w/ TBS6905 4x DVB-S2 PCIe tuner card running TVHeadend, Octagon SF8008 mini.
My Location
Cheltenham
I had multistream 10 on 12188H working the other day using the T2-MI command line tool in Linux -

GitHub - newspaperman/t2-mi: This is a commandline T2-MI baseband frame extractor

All the same channels as before, just encapsulated in T2-MI. The channels were breaking up though. I don't know if this was the tool or because my signal level wasn't good enough though!

PERSHIY (UT-1) seemed to be test bars only as well. I've definitely seen this transmitting normal programming when it was regular multistream without T2-MI.


Sent from my iPhone using Tapatalk
 
B

BlindFaith

Specialist Contributor
Joined
Oct 2, 2011
Messages
639
Reaction score
309
Points
63
Age
43
My Satellite Setup
-
120cm Echostar and 70cm (2nd location)
TBS 5925
My Location
52,0°N, 4,3°E and 52,5°N, 13,4°E
The channels were breaking up though. I don't know if this was the tool or because my signal level wasn't good enough though!
Click to expand...

Both multiplexes can be decoded fine but both show quite a few errors though SNR is high enough. I rather use the re-streaming option to Transedit :)
 

Attachments

  • Snap13.png
    Snap13.png
    340.5 KB · Views: 24
  • Snap14.png
    Snap14.png
    65.6 KB · Views: 25
MCelliotG

MCelliotG

Specialist Contributor
Joined
May 10, 2015
Messages
1,012
Reaction score
1,200
Points
113
My Satellite Setup
TBS 5925, Mut@nt HD51, EDISION OSMINI, MABO 130X144, DRAGONSAT DS3000 LED MOTOR, INVERTO BLACK ULTRA TWIN LNB
My Location
Thessaloniki, Greece
As T2-MI they both tune fine and show channels as expected, the question is: why did MIS 10 pass to T2-Mi now after all this time? Should that mean the other two 30 and 40 will pass as well?
 
Adam792

Adam792

Specialist Contributor
Joined
Sep 5, 2009
Messages
1,260
Reaction score
1,152
Points
113
Age
31
My Satellite Setup
Dishes: 80cm (5°W), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC w/ TBS6905 4x DVB-S2 PCIe tuner card running TVHeadend, Octagon SF8008 mini.
My Location
Cheltenham
I'll have to have a go with 4T2 Analyzer in Windows then!

The DVB-S2 card wasn't reporting any dropped packets or corrupted frames so it must have been something to do with the stream decoding on my system.


Sent from my iPhone using Tapatalk
 
MCelliotG

MCelliotG

Specialist Contributor
Joined
May 10, 2015
Messages
1,012
Reaction score
1,200
Points
113
My Satellite Setup
TBS 5925, Mut@nt HD51, EDISION OSMINI, MABO 130X144, DRAGONSAT DS3000 LED MOTOR, INVERTO BLACK ULTRA TWIN LNB
My Location
Thessaloniki, Greece
To be fair, sometimes some MIS channels do break up in my system as well and have to reboot the card from power, but I have the USB version. You can try MIS 20 and see if you have breakup on this package as well!
 
B

BlindFaith

Specialist Contributor
Joined
Oct 2, 2011
Messages
639
Reaction score
309
Points
63
Age
43
My Satellite Setup
-
120cm Echostar and 70cm (2nd location)
TBS 5925
My Location
52,0°N, 4,3°E and 52,5°N, 13,4°E
glamourservices said:
To be fair, sometimes some MIS channels do break up in my system as well and have to reboot the card from power, but I have the USB version. You can try MIS 20 and see if you have breakup on this package as well!
Click to expand...
I have USB (TBS5925) as well. You can record the single pid stream error free and then take 4T2 for offline decoding. The extracted elementary streams show the same number of missing packets. The culprit has to be at or before the playout :rolleyes:
 
Adam792

Adam792

Specialist Contributor
Joined
Sep 5, 2009
Messages
1,260
Reaction score
1,152
Points
113
Age
31
My Satellite Setup
Dishes: 80cm (5°W), 80cm (30°W), 60cm Zone 2 (13°E/19.2°E/28.2°E)
Receivers: HTPC w/ TBS6905 4x DVB-S2 PCIe tuner card running TVHeadend, Octagon SF8008 mini.
My Location
Cheltenham
I get errors using the Linux T2-MI tool on both MIS 10 and MIS 20.

The normal multistream channels on 12341H (MIS 30 and MIS40) play perfectly with no errors, and before the change to T2-MI MIS10 played fine as well on 12188H.

The SNR seems fine and the DVB-S2 card is not dropping any packets.
 
Top