Recent content by Jambo_Habari

Hello Admin, Please note, that the search engine for "Last 24 hours English language posts" does not work properly. When search is completed, 75 posts appears, but most of them is not in English ? Before you changed the style/layout of the forum, there was not any problems ín regards to...

Hello M8's Have a 140cm dish on my chimney for the past 6 years, and it has survived all the arctic winterstorms so far, has not moved a mm. however the motor has been replaced twice during the said time, can not cope with the -30+ temperatures. The trick is to have a solid chimney, as well as...

Per, Myself live in Salem. south of the city, and my 140 cm dish that I do use I picked up at a scrap-yard several years ago, some SEK 100 or so, but still it does the job, what is important is that you have a high quality lnb, and that there is no obstraction in front of the sat, as well as...

Dopamin (Per), Why mount the dish on the wall ? Myself mounted the 140 dish right on the top of the chimney, the highest point, with a clear view. Do not understand all your problems, we live in the same area, and you seams to have a lot of reception problems, when I have none, that is...

Hello All, Just for your info only. Myself also live in Stockholm, have a 140 cm dish, with a Invacom uni single nf 0.3 db lnb, including motor, and have no problelms soever with recepition. Cheers, Jambo

Hello Satslut, Had a similar problem earlier myself, and solved it by downgrading the software to version 4.7.1, after that cards and and cams are detected, and works well. In regards to duolabs the support is nada, tried myself but did not get any replies, posting in different sat-forums does...

Hello Nr66, Thanks for your kind reply, and all the info. Have solved the problem, and there was no problem with the cas-2 programming or loading of the sw into the cam anf STB. Took me some time to figure out, but the problem was that I was using a multi-cas firmware (118) in the receiver...

Hello M8´s Have an interestrig problem for the Gurus, and am hoping to get some assistance. Just received a dragon cam (3.1) and intended to test said cam on a sammy 9500 via ci, but so far no luck. Here is what I have done so far: Tried to loaded all kind of dragon sw up to the latest...