Recent content by Myhd

High/Low voltage switching problem ? read further on forum thread "22khz-tone-circuit-board-fix"

Hi Stevie, My DM500s (Clone) works with a positioner with DiSEqC 1.2 powering a 36V actuator. Just curious, the 1.8V out on your Sat cable is able to power the Lnb ? I measured and is 13.0V/17.7V on V and H channels respectively.

The power unit is prone to failure. So far I have 2 units blown. I suggest you get the unit check first (output 12volts). If a replacement required, get other type of 12V supply.

onlyamir007, yes and after slight tuning, confirmed paid channels at 85%, NHK at 91%, Ujala TV only at 72%.

I have 180cm dish, using C band on 68.5E. Most channels including MultiChoice on Intelsat 7/10 have SNR of >80%. NHK is strongest at 87%.

I installed Ngrab and also tried Ngrablite. It works but it is not reliable. 30% recording are OK, the rest terminated before set recording time. Is there any solution for this ?

The DreamBox 500 consumed 430mA at 11.4V. Original rating on Power supply is 2A, 12V.

There is no listing of Gemini server when accessing bluepanel>addons, not possible to download Tuxcom. How to set addons to gemini server ?

reinstalling "regsvr32.exe Dboxiisource.ax" DboxiiSource.ax from TuxvisionR v2.01 and v1.01, register same windows message. Any other suggestion? Problem solved. works on another PC

Windows error msg - "LoadLibrary("dboxiisource.ax") failed - This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix the problem.", when executing regsvr32 on windows XP under adminstrator How do I reinstal regsvr32.exe ?