New Lnb changer

Trust1 said:
Speaking with Louis van Gaal : I cant make choclade off it (real Dutch saying)
Click to expand...


Geachte meneer , schrijf dat in het Nederlands , dus we kunnen de volledige impact van het gezegde te krijgen. Bedankt

Edit

dear sir, please write that in Dutch, so we can get the full impact of the saying.
Thanks,

Sorry almost forgot forum rule 126112365
 
Ik kan er geen chocolade van maken !

rule 126112365 ?? do you have a picture of that ? :p
 
OK, it does not translate directly, but I figure it equates to " you cannot make a silk purse out of a sow´s ear "


OK , het niet direct te vertalen , maar ik figuur het komt neer op "je kunt niet een zijden tasje uit een sow's oor "
 
@Trust1, the 2 holes to the right was not your design, it was me setting it up.
you have provided 10 holes where i can put the lnb holder, origanally because i had good signal i used the hole 2 to the right, as soon as I corrected to the center all was good, and the signal became even better.
I am sure all on here would realise that they need to use the centre hole from the start, that is why i didnt explain, because it was obvious what I had done wrong.
 
WHATAGOAL1 said:
@Trust1, the 2 holes to the right was not your design, it was me setting it up.
you have provided 10 holes where i can put the lnb holder, origanally because i had good signal i used the hole 2 to the right, as soon as I corrected to the center all was good, and the signal became even better.
I am sure all on here would realise that they need to use the centre hole from the start, that is why i didnt explain, because it was obvious what I had done wrong.
Click to expand...
@WHATAGOAL1 , please post some pictures to help us all understand the finer points of the new arm and rotary LNB unit.
We almost went to " defcon 1 " tonight due to language variances across the forum. Thankfully, harmony has been restored with the help of Gods ( Forum that is, not theological ) we are now at peace, and ready to learn more.
Also, I like pictures!
 
1.8 Cm Parabola.webp
WHATAGOAL1 said:
@Trust1, the 2 holes to the right was not your design, it was me setting it up.
you have provided 10 holes where i can put the lnb holder, origanally because i had good signal i used the hole 2 to the right, as soon as I corrected to the center all was good, and the signal became even better.
I am sure all on here would realise that they need to use the centre hole from the start, that is why i didnt explain, because it was obvious what I had done wrong.
Click to expand...
Whatagoal , you are telling what you see from where you standing , we dont see anything , so how do we now whats left and right and what you mean by center ?
Do you mean the M8 holes in the wheel ? Why just not mention that ?
And center ? , perhaps point G ?
 
Last edited:
only 1 hole of 10 you provided can be centre hole at any time, when i move the motor with my receiver another hole becomes centre hole.
originally when i moved the motor the hole containing the lnb landed 2 to the right of center
Just a daft mistake, no one on here will repeat
 
Trust1 said:
View attachment 93980
Whatagoal , you are telling what you see from where you standing , we dont see anything , so how do we now whats left and right and what you mean by center ?
Do you mean the M8 holes in the wheel ? Why just not mention that ?
And center ? , perhaps point G ?
Click to expand...
I´m assuming that 17.20 inclinometer reading was only for set-up purposes and not the correct reading?
@WHATAGOAL1 pictures speak a thousand words! ( Don´t make me post Telly Savalas ) too late,

We can all get lost in words, but not in pictures!
 
WHATAGOAL1 said:
only 1 hole of 10 you provided can be centre hole at any time, when i move the motor with my receiver another hole becomes centre hole.
originally when i moved the motor the hole containing the lnb landed 2 to the right of center
Just a daft mistake, no one on here will repeat
Click to expand...
OK that explains what you mean .
To have a definite middle center , where I put my Ku lnb , a choose in the changer motor menu "go to reference" and stored that for that lnb .
Since there are the most satellites with Ku , I choose for that option .
When changer settings are mixed-up , you can allways get the Ku lnb in the center and start reprogramming from there .
 
Milamber said:
I´m assuming that 17.20 inclinometer reading was only for set-up purposes and not the correct reading?
@WHATAGOAL1 pictures speak a thousand words! ( Don´t make me post Telly Savalas ) too late,

We can all get lost in words, but not in pictures!
Click to expand...

Correct ! all those data is with front side dish vertical .
 
WHATAGOAL1 said:
@Trust1 , exactly, in your picture you are using what i refer to as the center hole
Click to expand...
Everybody sees that picture , if I did not mentioned its about the wheel , I dont think they know what you mean .
Is it so hard to write , yes I'm meaning the WHEEL ?
 
Trust1 said:
Everybody sees that picture , if I did not mentioned its about the wheel , I dont think they know what you mean .
Is it so hard to write , yes I'm meaning the WHEEL ?
Click to expand...
OH. FFS ( means oh flip, or dash-it ) why did you not say .........

upload_2016-5-31_0-25-6.webp

Like I say, pictures beat words!
 
just been outside to look at my car, that has 4 wheels, none of them look like the thing holding the lnbs
 
Back
Top