Top Tip T2-MI reception on E2 STB with SDG image - A complete step by step guide

frank-sinatra

frank-sinatra

Member
Messages
64
My Satellite Setup
Satellites/tv
My Location
Brazil
PID 64 works but I think c:150040 is right
Yes... C:150040

Thank you
 
frank-sinatra

frank-sinatra

Member
Messages
64
My Satellite Setup
Satellites/tv
My Location
Brazil
Working:

canal trece ok.jpg
canal trece2.jpg
db edit.png

Thank you
 
MCelliotG

MCelliotG

Specialist Contributor
Messages
682
My Satellite Setup
TBS 5925, Mut@nt HD51, EDISION OSMINI, MABO 130X144, DRAGONSAT DS3000 LED MOTOR, INVERTO BLACK ULTRA TWIN LNB
My Location
Thessaloniki, Greece
I'm glad this was sorted! Happy viewing!
 
M

MIDOVIE

New Member
Messages
3
My Satellite Setup
AMIKO ALIEN 8900
My Location
CAIRO
thank you so much
it works for me (amiko alien 8900 HD )
but i have a small problem only
3685 L 15284 works great
but 3665 L 14990 not working when trying to do same steps is there any help please thanks
CAN YOU HELP ME AND SEND ME A LINK FOR YOUR RECIVER BACKUP WITH MATCH TV ON EXPRESS 53E
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
26,726
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
You would need a 3.8m dish as a minimum to receive c-band from 53 East in Cairo.
 
Captain Jack

Captain Jack

Модератор
Staff member
Messages
10,601
My Satellite Setup
See signature
My Location
North Somerset
You're posting in the wrong section then.
 
M

MIDOVIE

New Member
Messages
3
My Satellite Setup
AMIKO ALIEN 8900
My Location
CAIRO
You're posting in the wrong section then.
i can`t do the tutorial some thing wrong all i want an enigma backup i use amiko alien 8900 to match tv on express 53e
 
Analoguesat

Analoguesat

Administrator
Staff member
Messages
46,487
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
i can`t do the tutorial some thing wrong all i want an enigma backup i use amiko alien 8900 to match tv on express 53e
Go back to the beginning and follow the instructions EXACTLY. We are a technical forum and dont give users the easy route out. If you cant get it going from the instructions supplied then you have to do without.
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
26,726
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
Go back to the beginning and follow the instructions EXACTLY. We are a technical forum and dont give users the easy route out. If you cant get it going from the instructions supplied then you have to do without.
Or put the money you will have saved to date into buying into a useful piece of equipment, like a 3.8m dish and C band LNB.
 
Lexzie

Lexzie

Member
Messages
155
My Satellite Setup
Xtrend ET10000 DVB-C, S2, T and IPTV, VU+ Zero 4k, Xtrend ET9500
80 cm fixed dish (28.2E/23.5E/19.2E/13E)
120cm Channel Master offset dish with polarmount (42E-34.5W)
My Location
The Netherlands
3. Getting the feed channel

Every Enigma2 receiver when it gets tuned to a T2-MI transponder will not download the channels directly (although this automation has to be implemented in the near future). Instead the tuner will lock and download a data channel. In the following example we used a T2-MI transponder on the C band of Express AM7 satellite on 40E.

In this image you can see that this frequency (3685L) is tuned normally with the internal tuner.


Now, scanning the frequency downloads the data service (it might take a while).
This does not work here. I'm using a VU+ Zero 4k which can lock and scan other Multistream (4.8E, 5W).
I'm testing on Astra 4A at 4.8°E, 12188 H/30000.
I have signal + lock but when I want to scan I get no result (so also no data channel).
I tried adding the services manualy, but no results.
What can I do to get these channels?
 
Captain Jack

Captain Jack

Модератор
Staff member
Messages
10,601
My Satellite Setup
See signature
My Location
North Somerset
T2-MI is *not* multistream. You can have T2-MI encapsulated into multistream as well as not.
 
mike1

mike1

Regular Member
Messages
123
My Satellite Setup
30w-60e motorised (64cm triax / black ultra)

Vu solo2

Mutant 51

Tm5402 M3
My Location
UK
I'm testing on Astra 4A at 4.8°E, 12188 H/30000.
I have signal + lock but when I want to scan I get no result (so also no data channel).


You need to install astra-sm and add as bouquet manually for zeonbud. I like watching the M1 ukraine music channel from 4.8e.
 
Lexzie

Lexzie

Member
Messages
155
My Satellite Setup
Xtrend ET10000 DVB-C, S2, T and IPTV, VU+ Zero 4k, Xtrend ET9500
80 cm fixed dish (28.2E/23.5E/19.2E/13E)
120cm Channel Master offset dish with polarmount (42E-34.5W)
My Location
The Netherlands
T2-MI is *not* multistream. You can have T2-MI encapsulated into multistream as well as not.
This one is Multistream (according to Lyngsat and Flysat). But I also noticed I have signal and lock without Transponder stream type to 'Multistream'.

I have installed astra-sm and tried adding the bouquet manually. Perhaps I did not do that right, can you give me some tips?
 
Captain Jack

Captain Jack

Модератор
Staff member
Messages
10,601
My Satellite Setup
See signature
My Location
North Somerset
Yeah, this one is both, multistream and T2-MI - a double whammy. I can't really help you with ZeonBud as I don't have it configured but my Solo2 and HD51 both downloaded a "dummy" data channel from other T2-MI transponders, so not sure why the Zero isn't doing it.

Perhaps someone already has a ready made list.
 
mike1

mike1

Regular Member
Messages
123
My Satellite Setup
30w-60e motorised (64cm triax / black ultra)

Vu solo2

Mutant 51

Tm5402 M3
My Location
UK
This one is Multistream (according to Lyngsat and Flysat). But I also noticed I have signal and lock without Transponder stream type to 'Multistream'.

I have installed astra-sm and tried adding the bouquet manually. Perhaps I did not do that right, can you give me some tips?
what is your box? i can give you files image?
 
Lexzie

Lexzie

Member
Messages
155
My Satellite Setup
Xtrend ET10000 DVB-C, S2, T and IPTV, VU+ Zero 4k, Xtrend ET9500
80 cm fixed dish (28.2E/23.5E/19.2E/13E)
120cm Channel Master offset dish with polarmount (42E-34.5W)
My Location
The Netherlands
SatSearcher

SatSearcher

Regular Member
Messages
215
My Satellite Setup
1m orbital dish with 0.1 Technomate LNB. TBS 6903 & TBS 5925 Card & Octagon SF4008. 39E-55W.
My Location
West Yorkshire
I'm also having this problem with my Octagon SF4008, it doesn't download a data channel, added it manually but it doesn't seem to work like that. Anybody know a work round for this?
 
mike1

mike1

Regular Member
Messages
123
My Satellite Setup
30w-60e motorised (64cm triax / black ultra)

Vu solo2

Mutant 51

Tm5402 M3
My Location
UK
Zeon bud Step 1 (Astra 4.8e T2MI)

telnet or ssh your box

Step 2

opkg install astra-sm
init 2
init 4

(init 2 & 4 will enable you to write over to the lamedb while the box is running)

Step 3

Open ftp client and over write files to the same path areas in the zip


/var/etc/astra/astra.conf
/var/etc/engima2/lamedb
/var/etc/engima2/userbouquet.zeonbud.tv

Step 4

reboot

Step 5

Go to the Zeonbud Bouquet!

works on vix and openpli tested on Octogan Sf4008 and Mutant 51.

hopefully this will help you out! includes 30w-62e motorised lists.m1.jpg
 

Attachments

Last edited by a moderator:
Y

Yogendra Singh

Member
Messages
3
how can i open T2-MI channels on Vu+ zero 4k from 80*e TP 11151 and 11187
 
Top