TBS 6925 PCi Card with hardware blind scan in DVB-S2 and DVB-S

[satesco]

How you found this, which blind scan receiver, TBS 6925 or?

Sorry for delay response.I used to find these feeds with HW TBS6925.I saw the signal on spectrum analyzer, then I checked with the player.I had signal but I can not lock it.It took a few days before I find this sr.Finding this low sr is done step by step and not found by blindscan.You have to repeated attempts until you can lock the signal.If HW tuner would be able to narrow a step of 0.1 MHz, it would be easier to lock signal when active transponders are so close,only a 1Mhz step!
Perhaps if the tuner would know to narrow band further ,then you might find low sr.with blindscan.But it is a performance that this tuner also lock low sr.!!!

 

[Digis@t]

Sorry for delay response.I used to find these feeds with HW TBS6925.I saw the signal on spectrum analyzer, then I checked with the player.I had signal but I can not lock it.It took a few days before I find this sr.Finding this low sr is done step by step and not found by blindscan.You have to repeated attempts until you can lock the signal.If HW tuner would be able to narrow a step of 0.1 MHz, it would be easier to lock signal when active transponders are so close,only a 1Mhz step!
Perhaps if the tuner would know to narrow band further ,then you might find low
sr.with blindscan.But it is a performance that this tuner also lock low sr.!!!

Thanks for answer and big explanation

 

[Llew]

I notice the BBC Mux on Intelsat 907 27.5W is now free to air, don't know how long it's been like that.

In TSReader, it shows it as DVB-T 0.000 MHz, not the DVB-S2 frequency, presumably because it's for BBC's terrestrial transmitters.

 

[remlap]

Decrypted on Thursday, I guess due to the storm in Scotland for backup maybe?.

 

[Llew]

Decryption problem with one of the Scottish terrestrial transmitters?

 

[satesco]

BBC package on Intelsat 907 encrypted again today at noon

 

[Llew]

Nice while it lasted

 

[playboy1]

BBC package on Intelsat 907 encrypted again today at noon

what is encrypdet ? only 0 data in it

 

[satesco]

what is encrypdet ? only 0 data in it

If you did not know until now,for few days BBC package from 27.5 W was FTA!Today the package was again coded.
Here is a sample,as you can see from Llew's pic. above:

 

[purplemarina]

im trying to get crazyscan>ts reader>vlc to work, i keep getting error messages from vlc. could some one give me a brief guide on how to set vlc up? thanks.

 

[Llew]

Do you get as far as calling up TSReader from Crazyscan's Monitor, and displaying the transponder you have scanned OK?

If so, it may be a problem with your VLC version. Which version are you using?

 

[purplemarina]

Thanks for your reply, crazyscan>ts reader works ok, i can get vlc to fire up but i get a black screen vlc is version 1.1.11.0 can you confirm the info i put in vlc. im using ts reader 2.8.46.1

 

[Llew]

AFAIK the ip and port for Crazyscan Monitor -> TSReader -> VLC are 127.0.0.1 1234.

At least that what I'm using.

 

[purplemarina]

Thank You, success!! it was my data on tcp port that was wrong i had used 6969

 

[Llew]

Good to hear. Yes, 1234 is what TSReader is set to use for streaming to VLC. I remember I was confused at first with the 6969 shown in the monitor.

 

[Digis@t]

Hi dxers my friends in great hobby

I need help.

I have TBS 6925, great Crazyscan and I know 2.7.44 have not in their folders Tcp.dl for Multistream support.

Can someone with good installed Pro put there that required Tcp.dl for download?

Because Lite version is unfortunately limited to only one min

Big thanks

 

[Llew]

It should be in TSReader Pro which you say you have.

Anyway, here it is -

 

[Digis@t]

Thank you

Do you have Pro, and is this file from Pro or maybe from Lite because I have got some info last night about they are not same

And where I need put this file properly? At Ts reader pro sources subfolder or also in crazyscan folder or alyo maybe in windows system 32 drivers?

 

[Llew]

I have the standard version, AFAIK the TCP Source file is the same as the Pro. Place in TSReader Source folder and see if it does the job.

 

[Digis@t]

I have the standard version, AFAIK the TCP Source file is the same as the Pro. Place in TSReader Source folder and see if it does the job.

What mean AFAIK?



Ps. look at pm.