Testing New White Sky UK Card - CAID 963

[dreamer786]

Guys CCcam 2.1.3 runs this card perfectly at the moment. The card stays at a normal operating temp. and takes entitlement updates regardless of which reader you use. It works in the internal readers in all boxes, and it works in the smargo.
If you're struggling to setup CCcam 2.1.3 with this card then use my config creator now in v0.9.0. Click the link in my sig for my config creator.

Yes indeed it works on infinity usb as well ecm time 0.110 smargo 0.136 to 0.140 entitlements updating fine on CCcam 213 with both external readers off course i am taking about sly white card

 

[chrisfound]

B16MCC

Hi, I just looked at the config software, don't you like the 7000 or is it not compatible for your software??
I will add that it has been installed on W7pro, so it is universal

 

[chrisfound]

I know I am going to get kicked, but where can I get an auto install CCcam 2.1.3, everything I have downloaded seems to be incomplete as it does not have the config file

 

[B16MCC]

chrisfound, I didn't include it in the box list simply because it's so very old.

It was replaced by the 7020, which was replaced by the 7025 which is now also discontinued. I wasn't interested in developing new software for hardware that hasn't been made for years. Simply select your box as a DM7020 and it will work fine.

 

[chrisfound]

Thanks
I do not consider anything too old to work on, I have been working on an amplifier that I designed 20 years ago

Thanks anyway, will try the software

Chris

 

[dino1111]

Guys CCcam 2.1.3 runs this card perfectly at the moment. The card stays at a normal operating temp. and takes entitlement updates regardless of which reader you use. It works in the internal readers in all boxes, and it works in the smargo.
If you're struggling to setup CCcam 2.1.3 with this card then use my config creator now in v0.9.0. Click the link in my sig for my config creator.

Hello
I'm trying to use sly White card with omnikey reader I just got and dreambox 7025, I see in your message that Smargo works, does it work for the Omnikey reader also?

 

[B16MCC]

This has been answered many times in this thread. Please read it. the card works in both readers. However CCcam does not support PCSC readers therefore you cannot use an omnikey in CCcam.

 

[bloto20]

b16mcc. it give me error that bk is to long but calculate correct bk if we cut out first 0 . make a info if someone get this error that he need to cut out first digit from boxkey and will work

 

[B16MCC]

Thanks for the info, I'll check over the error code. That error can mean only one thing, the box key generated was longer than 8 characters and therefore wrong.

In your case, are you saying you got a 9 character boxkey which started with a zero ?

 

[bloto20]

yes I get 9 digit bk. everything else works fine . sorry for offtopic but could you write more info with ubuntu server, more about configuring. Like for example newcs 1.67 rc1 +cccam 2.1.3 with 2 omnikey readers under newcs which share to cccam 2.1.3 with smargo + and cccam2.1.3 will be the server which will reshare to the other room in my house. And how to setup upgrade cards just from one user. Why two omnikeys 3121 (beacuse they was cheap on ebay ) and I think when cccam start support pc/sc readers the price of omnikeys will go up same as smargo i maybe wrong . why cccam on the server beacuse cccam can limit reshare and newcs can't so someone who use cccam can reshare unlimited cards under newcs also the secend question if I install newcs 1.67 with support pc/sc can I use smargo + ?? or I need to have diffrent, normal ver of newcs ?? and also I wish to use usb hub for omnikeys readers and smargo in normal port will be nice some config. however I just want to say thanks for tuto of setting up omnikey 3121 under dreambox, works fine I have some spare time this week and I think that I find new hobby . I forgett I will post in diffrent topic working script for newcs 1.67 under dreambox to start in auto mode strange script but it work . Please update that topic with pc linux server. Hmm.. I get small issue with wifi on ubuntu maybe you have some more experience. exactly I wish to use as just in case wifi mobile broadband, this usb stick can work as well as normal wifi card, but we can unlock for example huwei e160 and get sim card with unlimited broadband for example from three network, register debit card and top up every month for 5 pound unlimited broadband for just 5 pound a month, looks nice for me .

 

[WildBit]

I would have serious doubts of cccam supporting pcsc devices in the future

 

[B16MCC]

I agree it will never happen.

 

[totalacedude]

hi ppl

when do ur entitlements run out?

reason im asking is spoken to a few ppl and (me included) all seem to be running out at xmas and early new yr!

my old card has said 26/12 for ages but my new activated card (within last 2 weeks) only says 05/01

alot of other ppl are saying the same thing to me about when their entitlements run out!

so am i being paranoid or do u think something may be in the pipeline for around this time???

or am i just rambling

 

[totalacedude]

hi ppl

when do ur entitlements run out?

reason im asking is spoken to a few ppl and (me included) all seem to be running out at xmas and early new yr!

my old card has said 26/12 for ages but my new activated card (within last 2 weeks) only says 05/01

alot of other ppl are saying the same thing to me about when their entitlements run out!

so am i being paranoid or do u think something may be in the pipeline for around this time???

or am i just rambling

 

[tomthebomb1968]

Your just rambling Iain

Dont worry, have you set up your Mgcam client yet? When you start using it you will see the Emm s clocking up for that user. Then have a look at your entitlements. Mine just updated last week again from 21/12/09 to 11/01/10.

 

[tomthebomb1968]

Your just rambling Iain

Dont worry, have you set up your Mgcam client yet? When you start using it you will see the Emm s clocking up for that user. Then have a look at your entitlements. Mine just updated last week again from 21/12/09 to 11/01/10.

 

[carrpet]

Entitlements for card 0
.--------------------------------------.
| Provider | Expiry date | Expiry time |
|----------|-------------|-------------|
| 0003 | 2010-01-17 | 00:00:00 |
| 000B | 2010-01-17 | 00:00:00 |
| 0010 | 2010-01-17 | 00:00:00 |
| 001D | 2010-01-17 | 00:00:00 |
| 30E1 | 2010-01-17 | 00:00:00 |
| 30E2 | 2010-01-17 | 00:00:00 |
| 30E3 | 2010-01-17 | 00:00:00 |
| 30E4 | 2010-01-17 | 00:00:00 |
| 30E5 | 2010-01-17 | 00:00:00 |
| B732 | 2010-01-17 | 00:00:00 |
| B736 | 2010-01-17 | 00:00:00 |
| B765 | 2010-01-17 | 00:00:00 |
| B766 | 2010-01-17 | 00:00:00 |
| B772 | 2010-01-17 | 00:00:00 |
| B773 | 2010-01-17 | 00:00:00 |
| B846 | 2010-01-17 | 00:00:00 |
| B860 | 2010-01-17 | 00:00:00 |
| B8D2 | 2010-01-17 | 00:00:00 |
'--------------------------------------'

 

[carrpet]

Entitlements for card 0
.--------------------------------------.
| Provider | Expiry date | Expiry time |
|----------|-------------|-------------|
| 0003 | 2010-01-17 | 00:00:00 |
| 000B | 2010-01-17 | 00:00:00 |
| 0010 | 2010-01-17 | 00:00:00 |
| 001D | 2010-01-17 | 00:00:00 |
| 30E1 | 2010-01-17 | 00:00:00 |
| 30E2 | 2010-01-17 | 00:00:00 |
| 30E3 | 2010-01-17 | 00:00:00 |
| 30E4 | 2010-01-17 | 00:00:00 |
| 30E5 | 2010-01-17 | 00:00:00 |
| B732 | 2010-01-17 | 00:00:00 |
| B736 | 2010-01-17 | 00:00:00 |
| B765 | 2010-01-17 | 00:00:00 |
| B766 | 2010-01-17 | 00:00:00 |
| B772 | 2010-01-17 | 00:00:00 |
| B773 | 2010-01-17 | 00:00:00 |
| B846 | 2010-01-17 | 00:00:00 |
| B860 | 2010-01-17 | 00:00:00 |
| B8D2 | 2010-01-17 | 00:00:00 |
'--------------------------------------'

 

[betty1234]

b16mcc .can you give me a hand please.i have newcs 1.67 ccam 2.1.2 in my dm800 i added the box key and everything clears fine.i wont to share my card to my kids dream box 600 in her room/i put the same N:line as mine in the 600 cccam config wich is N: 192.168.1.22 15000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 and port forworded 15000 /the picture comes and goes in each box, can you tell me were im going wrong please .i know youre the best man to ask

 

[betty1234]

b16mcc .can you give me a hand please.i have newcs 1.67 ccam 2.1.2 in my dm800 i added the box key and everything clears fine.i wont to share my card to my kids dream box 600 in her room/i put the same N:line as mine in the 600 cccam config wich is N: 192.168.1.22 15000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 and port forworded 15000 /the picture comes and goes in each box, can you tell me were im going wrong please .i know youre the best man to ask